As an MBR membrane manufacturer, Rosun provides types of MBR at a competive wholesale MBR membrane price. MBR reactor (Membrane Bio-reactor) is a membrane separation technology with biological degradation. The membrane module can take the places of the secondary sedimentation tank, a large number of microorganisms are intercepted, which can increase the quantity of microflora, improve the sewage treatment capacity and efficiency, so that the effluent quality and volume load have been greatly improved, and the water can be used as reclaimed water. Contact our MBR flat sheet membrane manufacturer now!
Contact Us The core component of the MBR reactor is high-performance submerged membrane components. Compare with the traditional method (pressure filter), the MBR filter membrane negative pressure suction type filtering method using aeration to operation a sable membrane filter in the system.
The pollutant in sewage water will firstly biodegradation in a bioreactor, at the same time, because of the function of the pressure difference, the water, and some small-molecule solute which smaller than the aperture of the MBR filter membrane in the mixed liquid will pass the membrane, and then become the treated water.
Microorganisms and macro solute will be intercepted by the membrane, so it replaced the sedimentation tank by complete its water treatment and separate function.
Use the PVDF as the main material, Rosun flat sheet membrane with good stability of chemicals used in wastewater treatment, fouling resistance, and mechanical strength, has different types of membrane bioreactor processes principles and applications according to its efficacy area.
Advanced material:
The main material of the MBR filtration is PVDF, which has excellent chemical stability, permeate flux, permeate quality, and fouling resistance.
Better outlet water quality:
As one of leading MBR membrane manufacturers, the pore size of Rosun flat sheet membrane is around 0.1micron, and with advanced membrane technology increased the effective orifice area of the membrane surface then leads to excellent permeate flux and permeate quality. The output water can be reused directly.
Water quality | Traditinal technology | MBR technology |
COD ( mg / L ) | <100 | <30 |
BOD ( mg / L ) | <30 | <8 |
TSS ( mg / L ) | <30 | <1(near zero) |
Turbidity ( NTU ) | <2-5 | <1 |
Bacterial ( MPN / L ) | 103-104 | <100 |
Higher activated sludge adaption of Membrane Bioreactor:
Compared with the hollow fiber curtain membrane whose activated sludge adaption is only 4000-6000mg/L, Rosun flat sheet membrane can adapt 8000-15000mg/L activated sludge.
Longer service life and lower price:
Compared with hollow fiber curtain membrane, Rosun flat sheet have a longer service life of 3-6 years at lower mbr membrane price compared with 1-3years of service life of hollow fiber curtain membrane .
Less land space:
The MBR reactor tank can replace the function of a secondary sedimentation tank with an anaerobic tank, it can save 30% of land space.
Easy to operate and maintenance:
The flat sheet membrane can be just replaced a single damaged piece without change the holder when damage and replacement, replace just need 15 minutes.
Basic Components:
Pre-Treatment Tank
Inner Ladder
Sludge Pump
Reaction Tank
MBR Membrane Module
Recycled Tank
Lift Pump
Air Distributor
PLC System
Disinfection Device
Control Room
Rosun MBR membrane module is combined with the membrane element box and the aeration box. The membrane outlet is combined by a water collection tube in the membrane element box, and each membrane element can be individually installed and unloaded for easy maintenance. For the upgrade of traditional technology, just install the MBR filter membrane module in the aeration tank is ok.
Type | RF-025 | RF-080 | RF-100 | RF-150 | |
Effective area(m²) | 0.25 | 0.8 | 1 | 1.5 | |
Size: H*W*T(mm) | 495*365*7.5 | 1030*490*7.5 | 1190*518*7.5 | 1780*490*7.5 | |
Production rate ( L / pcs.day ) | 100~230 | 320~480 | 400~600 | 600~900 | |
Material of components | Membrane | PVDF + PET | |||
Outer frame | ABS | ||||
Pore diameter ( μm ) | 0.1 | ||||
Aeration rate ( L / min.pcs ) | 8 | 8 | 10 | 12 | |
Weight ( kg ) | 0.8 | 3.2 | 3.6 | 5.8 | |
Effluent turbidity ( NTU ) | ≤1 | ||||
Effluent SS ( mg / L ) | ≤3 |
Domestic Sewage Hospital Sewage
Landfill Leachate Laundry Sewage
Printing&Dyeing Sewage
Steel Circulating Water
Electroplating Sewage Tobacco Sewage
Domestic and Sewage Treatment Industry
Municipal sewage treatment and water reuse
Sewage treatment and water reuse
Hospital wastewater and water reuse
Residential area, school, scenic-tourist areas sewage treatment, etc.
Industrial Wastewater Treatment Industry
Chemical, petroleum, chemical fiber wastewater treatment
Garbage leachate treatment
Pesticide Pharmaceutical high concentration organic wastewater treatment
Slaughter, livestock manure, food processing wastewater treatment
Brewing, beer wastewater treatment